So, after weeks of procrastinating, the day finally came; it was time to upgrade Ubuntu. As many of you likely know, Ubuntu has a 6 month release cycle. New versions come out in November and April. The release of Saucy Salamander marked the first time I’ve had to deal with a Linux distro upgrade since I was running Fedora 8 back in 2008 (Not counting a brief encounter with Debian Squeeze just prior to using Ubuntu). As I recall, my attempt to upgrade to Fedora 9 was a disaster. Nothing worked, and it was a huge amount of effort. It was so bad that I decided to cut my losses and just go back to Windows Vista.
Needless to say, I wasn’t terribly excited about upgrading to Saucy. Finally, about a week ago I decided to stop being lazy and just do it. While it wasn’t quite the disaster that Fedora 9 was, I wouldn’t call the upgrade “smooth”. The first thing that I noticed was the fact that I could no longer lock the display. Since my cat likes to perform unauthorized refactoring of my code if I leave the display unlocked, this would not do. I did some googling, and it turns out that Gnome removed gnome-screensaver in Gnome 3.8. Gnome-screensaver controlled, among other things, locking the screen. All of the functionality was rolled into GDM. Ubuntu uses LightDM, so in order to protect my precious codebase I have to either switch it out for GDM, or use a Gnome shell plugin. First, I tried to install GDM, but every time I logged in I would get a popup saying that GDM crashed. I switched back to LightDM and installed the plugin. Everything seemed to be going fine, but things were just a bit more wonky. Every so often, when I’d go to unlock, the screen would freeze. I could just hope it was working and type my password and press enter to unlock it, but I like things to work right.
Not a huge deal though, I thought. I decided that I’d just grin and bear it. However, things continued to come apart. I went about re-compiling DMP Photo Booth and its modules to make sure everything was working correctly with the updated software versions. For the most part it was, but my working splash screen was broken. When shown, the window would pop, but the image on the window would not show. It seemed my call to
while (gtk_events_pending()) gtk_main_iteration(); was returning early. In the course of my investigation I decided to open the Glade UI file to make sure everything was right. The only problem? The version of Glade shipped with Saucy has a major bug that causes it to crash when you open a file with a dialog in it. You can read the bug report here.
For me, this was the straw that broke the camel’s back. It was time to try a new distro.
Let’s Meet Our Contestants!
I’ve been running Ubuntu for a while now, and have been mostly satisfied with it. I do have some concerns about their direction, but I’m not quite ready to break out the torches and pitch forks. However, I much prefer Gnome 3 to Unity, so I figured it was time to switch to a Gnome-centric distro. Luckily, there is a Ubuntu distro that focuses on Gnome: Ubuntu GNOME. My concern with this is that they seem to have manpower issues. I don’t feel like getting attached, just to have the rug pulled out from under me, so I won’t be using Ubuntu GNOME.
I feel that it is fair to say that Fedora is to Red Hat as Ubuntu is to Debian. Fedora is an old, mainstream Linux distro that has the financial backing of a large company behind it. It is likely to be around for years to come. Better yet; Fedora is a Gnome distro. Fedora 20 ships with Gnome 3.10, the current latest and greatest.
Back in 2008, I tried to run Ubuntu. Back then, it didn’t “just work”. Fedora did. Maybe it was time to don my Fedora and come home to my first Linux distro. I downloaded the live DVD for Fedora 20, and booted it up. Everything seemed great; Gnome 3.10’s fancy new UI elements were incredibly profound. Mozart and Da Vinci would surely be reduced to tears at the sight of their magnificence. I was sold. I started the installer and got to work. I set my language, hostname, and then went to configure my partitions. …aaaaaaand no hard drives detected. Crud. After some googling around, this seems to be a known issue. The Googler told me that I could disable SELinux and it would work, but no luck. I was told that I could use the non-live image and it would work, but no luck. Well, so much for that idea. I filed my Fedora installation media in the round file and decided what to do next.
It seems that the cool kids are running Debian these days. I’ve used Debian before, and had good experiences with it (uptime on my Debian Squeeze home server shows 102 days). The one sticking point is how old the software is. That is, old in the stable release; Debian Unstable has up-to-date software. The cool kids assure me that Sid is still more stable than Ubuntu or Fedora, so I decided to give it a shot.
Installing Sid is slightly more tricky than Ubuntu or Fedora. Here’s the installation blurb on the Debian Wiki:
Use the stable installer to install a minimal stable system and then change your /etc/apt/sources.list file to testing and do an update and a dist-upgrade, and then again change your /etc/apt/sources.list file to unstable and again do an update and a dist-upgrade. ... If this seems too complicated you should probably not be using unstable.
With those words of encouragement, I set off to work. I downloaded the Debian 7 net install media, and installed. I followed the wizard, setting up the usual things. For partitioning, I formatted my
/ partitions, and preserved my
/home partition. I spoke about this before in a previous post, but the short answer is that this keeps you from having to back up your data and settings. You should probably still do that stuff in case you do something stupid, but if all goes well you won’t need to.
When the time came to select additional software, I deselected everything. I finished the install and rebooted. The system booted up to the command line, and I logged in and
su‘d to root. Now that my Wheezy install was complete, it was time to upgrade to Jessie. This is accomplished by editing /etc/apt/sources.list and changing every instance of the word
testing. While I was at it, I added
non-free so I could get things like my wifi driver and flash. Next order of business was to install
apt-listchanges. These two packages change apt-get to warn you of bugs in software, so you don’t blindly install some software that will light your computer on fire. After that:
apt-get update apt-get dist-upgrade
…then I ate lunch. This process will upgrade my system to testing, and it takes a while. After it’s done, I repeated the steps above, replacing all instances of
unstable in my
sources.list. Additionally I had to delete the lines:
deb http://URL/ testing/updates main deb-src http://URL/ testing/updates main deb http://URL/debian/ testing-updates main deb-src http://URL/debian/ testing-updates main
…these don’t exist in Unstable.
apt-get dist-upgrade was running, it was time to watch some TV.
apt-get dist-upgrade completed, I had a Debian Sid system. One problem: it was command line only.
A Few More Things
First things first, I needed to set up sudo:
adduser [username] sudo init 6
After the reboot, my user is set up to use sudo.
I had to install some software. First up is Gnome:
sudo apt-get install gnome
This is starts a 1.3 GB download, so I watched some more TV. When that finished, I needed to install my wifi driver so that I could disconnect my temporary cat-5 cable:
sudo apt-get install firmware-iwlwifi
Next up is the Debian laptop applications. This package installs the software that would be installed by selecting the laptop task in tasksel:
sudo apt-get install task-laptop
I rebooted into Gnome. I logged in and connected to my wifi. Since I preserved my
/home partition, all my settings are still set up from Ubuntu, so there is very little asthetic configuration to be done.
The gnome package in Debian installs some other things besides Gnome. Among those things is LibreOffice, so I don’t have to worry about that. However, there are a few usability packages to install:
sudo apt-get install flashplugin-nonfree sudo apt-get install synaptic sudo apt-get install pkg-config
At this point I had a basic system set up. Now it is time to make sure DMP Photo Booth still works. Since I preserved my
/home, NetBeans is still installed. However, there is no JDK installed. This was an easy fix:
sudo apt-get install openjdk-7-jdk
Now it is time to install the dependencies for DMP Photo Booth:
sudo apt-get install libmagickwand-dev sudo apt-get install libglib2.0 sudo apt-get install libgtk-3-dev sudo apt-get install cups libcups2-dev
Some of the development tools I need still aren’t installed. GCC is installed, but for some reason gdb isn’t. Also, to do work on the trigger, I’ll need avr-gcc:
sudo apt-get install gdb arduino sudo adduser [username] dialout sudo init 6
Finally, I need to install Glade to modify DMP Photo Booth’s UI:
sudo apt-get instal glade
And that’s it!
It took me a good half of a day to get it all working, but so far so good. Iceweasel is still a thing, but mozilla.org thinks it’s the latest version of firefox, and my addons still work so I’m not going to worry about it. Plus, weasels rule and foxes drool.
Glade is working now, but DMP Photo Booth’s working screen is still broken. However, I’m beginning to think it never was really working right in the first place.
All in all, it’s been a successful load. 1 week in, and I still don’t miss Ubuntu. Hopefully Sid is good to me, and I’ve found my salvation from getting a new Distro version every 6 months.
- Books (9)
- Computers (5)
- Configuration (27)
- Electronics (14)
- Gotchas (55)
- Hardware (2)
- Serial Port (2)
- Implementation (46)
- Learning (34)
- Magic (19)
- Math (18)
- Opinions (16)
- Procedural Generation (4)
- Programming (102)
- API (19)
- C (50)
- C++ (24)
- Coq (2)
- Data Structures (21)
- Documentation (12)
- Emacs Lisp (3)
- Evil (3)
- Exception (9)
- File IO (7)
- Generics (3)
- Haskell (43)
- Idioms (8)
- Java (12)
- Lambda (5)
- LaTeX (2)
- Library (44)
- Lua (7)
- Namespaces (6)
- Paradigm (39)
- Parsing (4)
- Perl (4)
- Pointers (20)
- Polymorphism (1)
- Portability (8)
- Process (1)
- Refactoring (12)
- Rust (1)
- Testing (8)
- Thread (4)
- Undefined Behavior (1)
- Projects (44)
- Software (63)
- Arduino IDE (3)
- Emacs (8)
- Glade (1)
- Gnome (7)
- LibreOffice (3)
- Microsoft Office (1)
- Microsoft Word (1)
- NetBeans (19)
- Operating System (21)
- Tools (41)
- Visual Studio (3)
- Thought Process (41)